Our Fleet
DAK Drilling maintains three drilling rigs, three horizontal directional rigs, several excavators and two pump rigs to service our customers in Colorado, New Mexico, Utah and Wyoming. Our equipment was chosen to serve a variety of drilling needs. Along with the rig, we will provide the necessary service trucks to complement the work of that rig.
Atlas Copco TH-60
Our TH-60 is a versatile machine and can accommodate several different drilling methods. This allows us to start your well with one method and change if down-hole conditions dictate a different drilling method. This rig is equipped with a 75,000 lb pullback and has the ability to drill to approximately 2500 feet.*
Primary Drilling Methods
- Air Rotary Casing Hammer
- Direct Air Rotary
- Down Hole Hammer
- Casing Advance
- Direct Mud Rotary
- Down Hole Sampling
- Cathodic Well Installation
EPIROC T3W
DAK’s T3W is another versatile machine and can accommodate several different drilling methods. It also has the ability to switch drilling methods should formations dictate a different approach. This rig is equipped with a 40,000 lb pullback and has the ability to drill to approximately 1800 feet*
Primary Drilling Methods
- Air Rotary Casing Hammer
- Direct Air Rotary
- Down Hole Hammer
- Direct Mud Rotary
- Down Hole Sampling
- Casing Advance
- Cathodic Well Installation
Speedstar 30K
The Speedstar 30 K is another versatile machine and
can accommodate several different drilling methods. It also has the ability to switch drilling methods should formations dictate a different approach. This rig is equipped with a 30,000-lb. pullback and has the ability to drill to approximately 1200 feet*
Primary Drilling Methods
- Air Rotary Casing Hammer
- Direct Air Rotary
- Down Hole Hammer
- Direct Mud Rotary
- Down Hole Sampling
- Casing Advance
- Cathodic Well Installation
Horizontal Directional (HDD) Boring Equipment
DAK Drilling maintains three HDD units to serve our clients.
- Vermeer 24×40
- Vermeer 23×30
- Vermeer 22×20
Pump Service Units
DAK Drilling maintains two pump service units. Our pulling units are:
- Pulstar P-4000
- Pulstar P-10000
Both units are capable of servicing most wells in the Four Corners area. They are available on a 24 hour basis.
Careers
DAK Drilling is frequently seeking additional personnel for the following positions. :
- Drillers
- HDD Operators
- Drill Hands
- Pump Repair and Service Personnel
- CDL Crew Members
- Equipment Operators
If you live in the Four Corners area and believe your skills meet the above criteria, we would be pleased to receive your resume. Please complete the form below to submit your resume to our General Manager for consideration.
A few of our top requirements for employees are:
- Candidate must currently live within (a morning commute) radius of 45 minutes of Durango. (Farmington, Pagosa Springs, & Cortez)
- Candidate must have a valid Driver’s license AND clean driving record (*NO EXCEPTIONS*)
- Candidate must be willing to work in an outdoor field environment, even in CO winters
(We will respond to those offering skills that we believe would be an asset to our company but will not respond to all submittals.)
- OUR FLEET
Our Fleet
DAK Drilling maintains three drilling rigs, three horizontal directional rigs, several excavators and two pump rigs to service our customers in Colorado, New Mexico, Utah and Wyoming. Our equipment was chosen to serve a variety of drilling needs. Along with the rig, we will provide the necessary service trucks to complement the work of that rig.
Atlas Copco TH-60
Our TH-60 is a versatile machine and can accommodate several different drilling methods. This allows us to start your well with one method and change if down-hole conditions dictate a different drilling method. This rig is equipped with a 75,000 lb pullback and has the ability to drill to approximately 2500 feet.*Primary Drilling Methods
- Air Rotary Casing Hammer
- Direct Air Rotary
- Down Hole Hammer
- Casing Advance
- Direct Mud Rotary
- Down Hole Sampling
- Cathodic Well Installation
EPIROC T3W
DAK’s T3W is another versatile machine and can accommodate several different drilling methods. It also has the ability to switch drilling methods should formations dictate a different approach. This rig is equipped with a 40,000 lb pullback and has the ability to drill to approximately 1800 feet*
Primary Drilling Methods
- Air Rotary Casing Hammer
- Direct Air Rotary
- Down Hole Hammer
- Direct Mud Rotary
- Down Hole Sampling
- Casing Advance
- Cathodic Well Installation
Speedstar 30K
The Speedstar 30 K is another versatile machine and
can accommodate several different drilling methods. It also has the ability to switch drilling methods should formations dictate a different approach. This rig is equipped with a 30,000-lb. pullback and has the ability to drill to approximately 1200 feet*
Primary Drilling Methods
- Air Rotary Casing Hammer
- Direct Air Rotary
- Down Hole Hammer
- Direct Mud Rotary
- Down Hole Sampling
- Casing Advance
- Cathodic Well Installation
Horizontal Directional (HDD) Boring Equipment
DAK Drilling maintains three HDD units to serve our clients.
- Vermeer 24×40
- Vermeer 23×30
- Vermeer 22×20
Pump Service Units
DAK Drilling maintains two pump service units. Our pulling units are:
- Pulstar P-4000
- Pulstar P-10000
Both units are capable of servicing most wells in the Four Corners area. They are available on a 24 hour basis.
- CAREERS
Careers
DAK Drilling is frequently seeking additional personnel for the following positions. :
- Drillers
- HDD Operators
- Drill Hands
- Pump Repair and Service Personnel
- CDL Crew Members
- Equipment Operators
If you live in the Four Corners area and believe your skills meet the above criteria, we would be pleased to receive your resume. Please complete the form below to submit your resume to our General Manager for consideration.
A few of our top requirements for employees are:
- Candidate must currently live within (a morning commute) radius of 45 minutes of Durango. (Farmington, Pagosa Springs, & Cortez)
- Candidate must have a valid Driver’s license AND clean driving record (*NO EXCEPTIONS*)
- Candidate must be willing to work in an outdoor field environment, even in CO winters
(We will respond to those offering skills that we believe would be an asset to our company but will not respond to all submittals.)